How To Remove Power Steering Pump Pulley Without Puller?

It’s quick and easy to get rid of the Power Steering Pulley, but it’s not easy to do when the car is running. As a general rule, the poultry should be removed & reinstalled only with extreme care. If you’re not a car person and don’t know how to deal with a car problem, you should talk to a car tech. There seem to be many people who say that you can’t change the power steering pole without a mechanism. However, you can still take care of it at home by yourself.

One thing to keep in mind is that having taken a pulley without the need for a puller is very risky. You might break or bend the pulley during the process, making it useless. For this purpose, you might want to buy or borrow a puller.

When you read this, we’ll show you how to remove a pulley without having to use a puller. This way, you could learn how exactly it works along with all the associated risks. In case you miss out on the right tools, it will also show you if it’s worth it to do it.

Can You Remove a Pulley Without a Puller?

Can You Remove a Pulley Without a Puller

Many people practice this; however, it could be hazardous. You might end up bending or breaking the pulley if you do this. You can remove a pulley without the need for a puller, but it would also vary depending on the type of pulley you are working with.

You can do this by taking out the bolts that hold the pulley. In general, pulleys have a few extra holes. So you can put a few extra screws that have been taken out from holes.

What Tools Can You Use to Replace a Puller?

How Much Does A Power Steering Pulley Cost

There are several options available if you do not have a puller. One thing to keep in mind is that the tools below could help you get the pulley off. However, you won’t find it as effective as a puller. 

  • Pickle Fork-Type Pulley Remover
  • Threaded rod or bolt-type pulley removers

To choose the tool you’ll use to remove a pulley, think about what kind and how big it is.

In summary, numerous pulley removers can be changed, which means they can work with various types and sizes of the pulley. However, if you have worked only with a specific shape or design, you must check the puller first. 

One problem with pulleys would be that, throughout most cases, you can easily break them if they are pulled the wrong way or with the wrong pulley removal tools. Mostly there are types of pulley removal tools required for removing a heavy steel pulley from a shaft.

How To Remove A Pulley Without A Puller? 

1. Remove The Significant Pulley Before Reinstalling

Check to make sure that the main drive pulley is separated and then put back in place while changing the power steering pulley. You must push tha new pulley into the input shaft to improve the internal pump. As a result, the engine can move power from such a serpentine belt into the pump’s pulley. It is because the inner shaft, as well as the pump, are linked together.

2. Attach And Align Your Chosen Removal Tool

It could go up to  12 inches from the front of the pump while using a tool. Once you remove the part, you need to clean the pump placed at the mounting bracket to make room for the other tool in front of the pump. Press to move and fit the tool in the right place.

3. Allow The Removal Tool To Pop And Work

As soon as the pulley starts, you’ll hear a sound that tells you the tool has begun. If you want to pump the inlet shaft, you first have to go through this. Remember that you need to steam the pulley somewhere around 120-130 degrees F, then put it back on the machine.

4. Work On A Clean Shaft

You must put the pulley on a clean, rust-free shaft. A long and complicated installation process will happen if you don’t clean both the shaft and the pulley before you put them in the machine. Do not put any kind of grease, water, or liquid on the pulley or the shaft that it goes on. If you see any grease or oil, make sure to clean it up before installing the machine. Lubrication can make the pulley slip and make the installation fail, making the machine fall apart.

5. Place the pulley into the shaft

 It’s necessary to connect the pulley and the shaft when you are sure that it’s warmed up to 120 to 130 degrees. You’ll need to turn the pulley until it fits accurately on the shaft in a perfect way; as a result, the line will be exactly where you want it to be before you start setting it up.

6. Turn On The Pulley And Remove The Wobble

It’s time to turn on the pulley to get rid of the wobble in the machine. It means that the pulley is square and fair, which means it is in the right place. After that, we’ll put the installation tool at the front of the pump’s input shaft and connect it with the tool.

7. Ensure that the collar is tight and fixed

After the installation is done, the collar must always be tightened to the pulley so it doesn’t move. It begins with a ratchet and a set of wrenches to do the job right. Ensure that no areas need to be fixed.

8. Flush All The Things With The Pump Input Shaft

It’s important to keep tightening the tool till the power steering pulley is entirely in place. It needs to be drained with the pump’s input shaft simultaneously. As soon as you make sure that the pulley is flush with the shaft, the job is done here.

FAQs

How Do You Put A Pulley On A Power Steering Pump Without The Tool?

LIGHTLY It’s time to hammer that pulley onto the pump with as little force as possible. You want to have the pulley squared and running. You should put a socket, shaft, or second hammer among your main hammer as well as the pulley when the shaft keeps spinning into the pulley. This will help to avoid damage and reduce the shock force.

What Does A Bad Power Steering Pulley Sound Like?

Also, if the power steering pump pulley or mounting bracket is not tight, it will noise. Because of wear, a rack might fall off. It could also be a sign that the serpentine belt isn’t tight enough or that the idler pulley bearings are about to fail.

Should The Power Steering Pulley Spin Freely?

Driven pulleys must turn freely without making noise when spun by hand, even without the drive belt’s friction and the engine not running. There will be some drag (resistance) when the P/S pump and water pump pulley are turned slowly, but they will still turn freely with little resistance.

What Spins The Power Steering Pump?

A belt and a pulley connect this pump to the car’s engine. There are retractable vanes that move inside an oval chamber that moves as they move. As the vanes move, they pull back the hydraulic fluid from the return line at external pressure while pushing it into the outlet at high pressure.

How Much Does A Power Steering Pulley Cost?

How much does it cost to buy a Power Steering Pump Pulley? A new power steering pump pulley costs between $15 and $160, but it’s not uncommon for them to cost more. Many things, like the brand, the number of pieces, the material, and the finish, can affect the price of the part. Labor can cost a lot, with various prices from $100 to $250.

Wrapping up

It’s a lot of work, but the engine will run smoothly when it’s done. Make sure you’ve got each step carefully and think about the right things to do. Another thing to remember is that the removal steps are essential because specific steps also have to be taken first before you can do car-related action. You may need a pulley to remove the power steering pulley. We hope this helps. There are many risks when pulling a pulley, and you can’t do this with every pulley. However, you can use different tools to get the pulley off the chain. So you can also remove it by following some steps.

Finally, all the tools would not be the same as pulling things. That’s what you need to do to get a puller. You can either buy an affordable tool or ask someone else to borrow it, or even take it from a service center. Make sure to use the puller whenever required rather than going for other ways that could damage your car. 

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top