Best Sounding Exhaust for F150 EcoBoost: Reviewed & Buying Guide

Introduction

Your Ford F150 has a powerful engine that delights you, but the exhaust, which is not satisfying your taste, is a significant concern. You seek to amplify your vehicle’s sound but are unaware of how to begin.

Investing in the best sounding exhaust for f150 EcoBoost will be the most effective way to achieve this. Although there are different options offered by top manufacturers, our buying guide on what to look for in a sounding exhaust for f150 EcoBoost will assist you in making the best decision.

In addition, this article will aid your selection process and provide you with the relevant information you need. Check out our reviewed list of the best sounding exhaust for the f150 EcoBoost.

Eight best sounding exhausts for f150 EcoBoost: Reviewed

Getting a brand-new exhaust system can be a cost-effective performance improvement for your truck. It will prevent your engine from overheating and exhaust from clogging. The fumes discharged will be efficiently taken care of.

Here is the list of our eight best-sounding exhausts for the F150 Ecoboost.

#1- BORLA 140616BC Exhaust System

BORLA 140616BC Exhaust System
This exhaust system is recommended for the 2015 to 2020 3.5L EcoBoost F-150. It is characterized by a booming sound capable of exciting you as an F-150 owner. The multi-core inner profile of the exhaust system is responsible for the sound effect.

The system’s muffler possesses a high-end prototype with a 3-inch single inlet and a 2.25-inch dual opening. In addition, it bears punctured cores that intensify the reverberations of the exhaust while ejecting waste fumes more rapidly.

As for construction, Borla’s structure is finished with T-304 stainless steel, higher than the 400-series steel. The kit has been created as a perfect fit with an angled cut that gives a violent look and increases horsepower.

Pros

  • Possesses a booming sound profile
  • The stainless steel material is resistant to rust
  • The high-end muffler with pierced cores helps magnify the sound and increase performance.
  • It comes with huge exhaust ends with a chrome polish
  • It comes with all the hardware components required for simple installation
  • It has a high level of durability.

Cons

  • It can be costly
  • Arising issues with drones

#2- Flowmaster 817522 Cat-Back Exhaust SystemDG508GREEN Coil Pack

Flowmaster 817478 Cat-back System 409S - Dual Rear/Side Exit - Force II - Moderate Sound

This cat-back exhaust system -made from stainless steel- was created for the 2009-2014 F-150 trucks. It can function adaptively with the 4.6L, 5.0L, and 5.4L engines. In addition, you can choose to use it as a dual external tailpipe configuration.

This exhaust systemhas a Super 40 muffler connected to a 2.50-inch mandrel-bent tailpipe. This high-grade stainless steel has a large 3.50-inch polished tip, and the exhaust produces aggressive sounds. In addition, you can easily integrate it with a factory catalytic converter of any F-150 built between 2009 and 2014.

Pros

  • Easy to install at home
  • Long life span
  • Emissions do not violate regulations
  • The system is covered by a warranty of a lifetime
  • Uses delta flow technology to produce an aggressive tone
  • Considerable price tag

Cons

  • The sound made may not be adequate
  • Substandard bolts are used for clamping

#3- Power Go Motorsport 1252D01500 Dual Outlet Outside

It has a blacked-out end and inflamed 4-inch pipe portion, maximizing the mixture of free-flowing exhaust and satisfactory noise levels. Installing this exhaust system does not affect your current kit since the required bolts are in place. However, it mainly enriches the look of your turbochargers. The result of this purchase is a one-mile-per-gallon raise in fuel expenditure.

Pros

  • It is worth the price
  • Mileage increase offer is made available
  • A variety of wheelbases exists
  • The sound is tremendous.

Cons

  • Issues may arise with drones.

#4- Roush 421985 Cat-Back Exhaust

Roush 421145 Exhaust System

The Roush 421985 Cat-back Exhaust system can otherwise be called the best sounding exhaust for f150 Ecoboost. With steel tips, the exit system is located on its side. Also, the system structure bears a Y-style mid-pipe and muffler.

The mandrel-bent tubes certify regular flow and upgraded performance as well as resilience. It requires no modification during installation as it uses the truck’s factory hanger. A three-year warranty is assured, and delivery of necessary hardware and accessories.

Pros

  • Its sound profile is sporty and aggressive.
  • Parts are designed with high-grade stainless steel
  • The 3-inch diameter pipes are bent to boost the flow
  • The ability to utilize factory hanger locations makes installation easy
  • Makes available hardware required for installation

Cons

  • Only three years warranty is guaranteed
  • Band clamps required for the exhaust do not secure all areas.

#5- Flowmaster 817691 Outlaw Stainless Steel Cat-Back Exhaust System

Flowmaster 817478 Cat-back System 409S - Dual Rear/Side Exit - Force II - Moderate Sound

This system was designed for F-150s from 2009 to 2014, capable of working with 4.6L, 5.0L, and 5.4L engines. It makes provision for a dual out rear and a dual exterior tailpipe. This cat-back system has been certified legally and was made using stainless steel with a mandrel-bent pipe.

A super ten sequence muffler is present in the 3-inch tailpipe. The stainless steel tips are double-walled, measuring 4 inches in diameter. Though the warranty given is limited, the package provides the hardware required. In addition, its build guarantees an astonishing sound emission.

Pros

  • Its sound is quite loud compared to others.
  • The exhaust system is built with T304 stainless steel.
  • The look is enhanced by its black ceramic exhaust tips.
  • A limited lifetime warranty is guaranteed.
  • The mandrel-bent tailpipes aid performance.

Cons

  • Its covering is not durable.
  • The clamps included in the package are not appropriate for use.

#6- MBRP S5260BLK 3″ Cat-Back, Single Side Dual Outlet

MBRP T5074 6' O.D. Dual Wall Angled Exhaust Tip (T304)

This particular exhaust system is created for the 2.7L, 3.0L, 3.3L, 3.5L, and 5.0L engines. It differs from others by its steel design. It is known for a high heat layer-specific for exhaust applications. It is welded onto the default hangers of the F-150, making installation easy.

The 3-inch mandrel-bent tubing enhances the sporty look and efficiency of your truck. In addition to the one-year warranty on the head covering, it has another three-year warranty on other exhaust system elements.

Pros

  • This system is designed with aluminized steel and possesses a heated coating specially integrated for exhaust applications
  • Its fit into default exhaust hangers solves installation problems
  • 4-inch exhaust tips are additional benefits
  • Variability exists in stainless steel and aluminized steel formats

Cons

  • Only a three-year limited warranty is guaranteed on this system

#7- MagnaFlow 15461 Large Stainless Steel Performance Exhaust System Kit

MagnaFlow 15588 Large Stainless Steel Performance Exhaust System Kit

The MagnaFlow 15461 exhaust system kit is distinguished by its deep sound production made possible by its straight muffler design. This muffler form amplifies sound better than other muffler designs.

Also, this exhaust system has mandrel-bent tubing. In addition, several configurations are possible, comprising one, two, or four outlets. This system is durable and features a lifetime manufacturer warranty.

Pros

  • Its stainless steel design makes it rust resistant
  • It has a turbo straight through muffler that aids the production of a loud and deep sound profile
  • Several configurations are possible with this exhaust system
  • A lifetime construction warranty is guaranteed
  • All accessories necessary for installation are provided

Cons

  • Difficulty can arise in the attempt to line this exhaust with your truck’s hangers.

#8- CORSA 24392 Cat-Back Exhaust System

Corsa 14031 Exhaust Tips

Finally, this exhaust system is a high-quality exhaust system designed with reflective sound cancellation technology. It promises an aggressive exhaust note void of drones. A deep rumble sound is possible with this system upon installation.

The exhaust system includes a straight-through design that improves airflow, fuel economy, and function. It bears slash-cut and sophisticated stainless steel exhaust tips. In addition, a ten-year limited warranty is assured on the purchase of the exhaust system.

Pros

  • Ability to limit drone sounds at high speed
  • It gives off an aggressive and deep rumble sound
  • The straight-through strategy of the tubing boosts performance and fuel efficiency.
  • The system is completed from rust-resistant stainless steel.
  • It comes with comprehensive setup instructions.

Cons

  • A ten-year warranty exists only on this system, which is a disadvantage to other component manufacturers’ lifetime warranty.

Important Note: To make a wise selection from this list reviewed, examine your exhaust system to make a compatible choice.


Different types of exhaust systems

An exhaust system is in charge of amassing the exhaust gases from the cylinder head in the engine. These gases are generated from the engine cylinders through the exhaust, acting as a funnel and emitting through an opening called the front pipe.

The gases exit the system through a silencer or a muffler which ensures a clean design is possible in your car, and its smooth running is not countered. These are the different exhaust systems; which are:

Single Exit Exhaust

The single exit pipe is a standard exhaust system defined by its single exit. It is found on cars and trucks bought directly from the supplier. It cannot be regarded as the most efficient system but claims to be the cheapest to assemble and mount. You can find the pipe’s exit on the passenger’s side of the car.

Dual Exit Exhaust

This exhaust system is generally fixed to give a sporty look to your vehicle. It makes a more profound note emission possible for the exhaust and amplifies the powerful sound of the engine. This system comprises two exhaust pipes on both sides of your car. It differs from other exhaust systems by the pipes, which are not bent around the wheels.

Opposite Dual Exhaust

These exhausts are required where dual rear exhaust systems cannot be bent. Opposite dual exhaust systems are set up to work contrarily to other exhausts. These are enveloped around the wheel with the bend to augment a purifying process. These exhausts will be identified on vehicles used for tugging large loads.

Dual Side Exhaust

This dual-side exhaust system has double pipes located next to each other on one side. As a result, they disperse gasses more competently than single exit pipes. As a result, the appearance and sound of these exhausts are analogous to a high-performance system offering performance enhancement.

High-Performance Exhaust

Lastly, high-performance exhaust systems are relatively more costly but valuable in high efficient filtering of exhaust gasses. Although these are not regular and should not be fitted to the vehicle aftermarket, they can increase the proficiency and delivery of the engine.

Important Note: These exhaust systems can be upgraded and coupled with the best-sounding exhaust for f150 EcoBoost to satisfy your exhaust delivery desire.

How to Install exhaust for f150 EcoBoost?

Changing your exhaust can be easy unless you have a rear header system where a link is needed from the header to the tail. If not, you can change the exhaust in any comfortable position using the jack available.

A floor jack with support beams will enable you to achieve it while standing and saves time. Before you begin, arrange the components required for the installation sequence, and set the necessary hardware or equipment aside. Then, follow the steps below for easy installation.

Step one

Begin with a dry test before connecting the new system to verify that all pieces are compatible. This saves time wasted on repetition after discovering mismatched components in the middle.

Step two

Then loosen the old exhaust system from the back while moving forward as you progress. Finally, get rid of all the constituents, but keep the hooks; you may need more hardware.

Step three

Put the purchased hangers in their appropriate locations. When this has been done, start by hanging all the exhaust components from the car’s interior. Set up the upstream pipe but avoid twisting it yet.

Step four

Connect all parts now, and throw all the components into place using a torque wrench. You should be good to go after following these easy steps listed. Before installation, confirm that your exhaust system aligns with our buyer’s guide to ensure maximum benefit.

Buying Guide: what to look for in a sounding exhaust for f150 EcoBoost

If you desire to amplify your vehicle’s sound, different choices can be made that will offer extraordinary performances. However, take note of features such as reverberation or tone control when selecting an exhaust device. Here is our buyer’s guide to help you.

Sound

A vehicle’s exhaust sound depicts the efficiency of the car’s engine. A roar should draw attention to a faulty engine component or engine. A subtle rumble reveals otherwise and is no cause for alarm.

Durability

Your exhaust system can be a time-consuming and challenging component to deal with on your vehicle. In addition, the materials used in assembly can impact the durability and dependability of your new metal-based or stainless steel exhaust.

A recommended choice in most cases would be an aluminum or stainless steel pipe that has been joined together to avoid leaks down the road.

Additional features

The sound of a car’s exhaust system is an essential consideration to look at. An enhanced-sounding exhaust system, which is expensive, will need additional functionality for it to be worth considering over quieter and less costly options.

Ease of installation

Although installing an exhaust system ought to be a simple procedure, it can be time-consuming and infuriating if thorough deliberations are not made beforehand. For instance, enough space must be accessible to prevent accidental bumps during tasks.

Examine the legal documents

Finally, suppose you consider how your old model produces a louder sound; there is no established law stating a difference in noise levels required for cars regarding safety or performance. When you are ready to make a change, please find out the laws that apply in your state and ensure you follow them strictly to avoid penalties.

FAQ’s

How do I make my F150 EcoBoost louder?

Purchase an aftermarket exhaust system that flows better and changes the exhaust tone. Power might be increased, and performance can be better if a turner turns the engine.

Does aftermarket exhaust hurt the engine?

It will not harm your engine, and it can increase efficiency by aiding exhaust flow rather than being louder.

Wrapping Up

In conclusion, there are exhaust systems that can add sound and upgrade the efficiency of your vehicle. Furthermore, these exhaust systems eradicate smoke speedily without forfeiting engine performance or durability. If you decide to purchase the best sounding exhaust for f150 Ecoboost, read through our section on installing an exhaust for f150 Ecoboost guide for a successful process.

Leave a Comment

Your email address will not be published.

Scroll to Top